Then your focus should be on the alignment of the bit and the marked line. You can begin by making a dimple in the wood with a center punch to keep the bit from roaming around. But as long as your eyeballing technique is good enough, this should be a piece of cake. Is it possible to drill straight holes without a drill press? There is no doubt that this tool makes it easy to create perfectly accurate straight holes. Most people doing DIY jobs around the house don’t have a drill press, however. This means using a regular cordless drill instead. A big challenge is keeping the drill and bit steady and square in every direction - especially when you start drilling and using force to create your holes.

Some drills also come with levelers to drill horizontally. But the slight disadvantage to this method is that the process depends greatly on the skill of the operator and the position of the workpiece. Metal Square Drawing a line: If the hole you are drilling is near the edge of the workpiece, and you are without a drill press, you can draw a perpendicular line adjacent to the surface to guide you.Many portable drill guides come with a pivoting base. This feature allows you to pivot the guide to the end of the rods at an appropriate angle. With the guide holding your drill at the desired angle, you can rest assured knowing you won’t have to tilt your workpiece to achieve satisfactory results. Hole sizes Ensure your drill guide has holes for multiple drill bit sizes. While it’s easy to assume you won’t need multiple options, there may come a time when you will need a different-sized guide.

Place it on the side to create a perfectly flat bottom “L” exactly where you want to make the hole. Hold or clamp the jig the position so that the bit pressed tight against the inside corner. Then drill down. This drill guide is coated with a light oil that keeps metal from rusting and corrosion. Moreover, you can count on it for all your drilling needs because it’s suitable for drilling over flat surfaces, round parts, and corners. The Drill Press converts your portable drill into a mini drill press. It’s made with two upright rods, a flat metal base and amounting device to hold and secure it’s movement up and down on the rod. Just a bit of set up, and you are good to go. Other Useful Tips Our team has put together the factors which will help you choose the right drill guide to include in your tool kit. Accuracy Drill guides are made of steel, aluminum, and plastic. The material of the drill guide contributes to the weight and the comfort of the device. A drill guide composed of lightweight material is easier to handle and use. When buying a drill guide, your preference should be to invest in a metal-made drill guide compared to plastic ones. A drill guide composed of metal tends to last for a longer time. Durability

Before you get started, make a small starting divot using an awl so that your drill bit has a spot to land. You will need to focus on creating the right 90-degree angle. If you a starting divot, your placement will be set from the start, which allows you to focus on the drilling.