Please Note: avoid splashes on sensitive areas such as metal or wood, painted or varnished surfaces, wall paper, etc. We highly recommend trying the product in an inconspicuous area prior to use. Lithofin MN Power-Clean is ideal for cleaning marble, natural and engineered stone. Lithofin MN Power-Clean is a product low in solvents, low in odour, and economical in use. It is a mild alkaline cleaner, which contains a balanced mixture of cleaning components that guarantee optimal performance.

Power Clean should not be used to clean Metal, Wood and any painted or varnished surfaces and should be kept away from wall paper. If any of these materials are close to or adjacent to your working area, they should always be protected first before using this product. This product is not suitable for use on leather, all types of fabric, carpets or laminate flooring and all these materials should be protected from splashes of this product. Please note that the courier we use offera next working day service as standard but this is not guaranteed.For an additional charge the following deliveryservices may also be available - Saturday Morning, Next Working Day Before 12 Noon, Next Working Day Before 9am (* Please telephone us on 01962 732325 to discuss.) If the result is not satisfactory, repeat the process allowing the Lithofin MN Power-Clean to work longer and brush more vigorously.To strip off and old seal, wax polish or any other type of finish, it is best to work in small areas of 1 or 2 sqm areas at a time. Mix the product 1:1 and apply liberally but do not allow it to dry on the surface. Agitate the area with a stiff brush or broom and then remove it with either a mop or a floor squeegee. Once you have removed the product rinse the area with clean water, if the floor is not as clean as you want repeat the process before moving on to the next section. Note: avoid splashes on sensitive areas such as metal or wood, painted or varnished surfaces, wall paper, etc. Always test the product in an inconspicuous area prior to use. Coverage: as supplied: approx. 5 to 10m² depending on dirt diluted: up to 30m² Advice: for removing wax layers and the like, we recommend WAX OFF. For cement residues and rust discolorations on granite, gneiss and similar acid resistant stones, use MN Builders Clean.

This is not a type of product that should be left to dry on any surface, always rinse the area off with clean water. If you use hot water to rinse off the product the area should be dry and ready for use in about half an hour. CONTINUED USE GUIDELINES Externally it can be used on all natural stone surfaces including patios, walls and garden furniture etc. Stone paving slabs and drive ways can also be cleaned with Lithofin Power Clean. Lithofin Power Clean is suitable for cleaning all types of natural stone surfaces. These include floors, walls, stairs kitchen worktops. It is suitable for use on all bathroom surfaces made of natural stone. These surfaces include polished marble, honed marble, rough marble, all the types of granite finishes, polished or honed travertine and slate. Power Clean can also be used for cleaning stone fireplace surrounds and hearths. THIS CARRERA MARBLE FIREPLACE WAS CLEANED USING POWER CLEAN AND A STEAM CLEANER Please note that the above charges are subject to a 65p surcharge for all deliverieswithin the London Congestion Charge area (EC1, EC2, EC3, EC4, N1, NW1 2, NW1 3, NW1 5, SE1, SE11, SW1, SW11, W1, W2 2, WC1 and WC2)Lithofin MN Power Clean is a mildly alkaline cleaner, which contains a balanced mixture of cleaning components which guarantee optimal performance. It is nearly odourless and highly economic.

The only key to keeping your floors clean and free of dirt, residue, and stains is regular and efficient cleaning. Simply use Lithofin MN Power-Clean can be enough. If you’re unsure how Lithofin MN Power-Clean is used, chat with our team experts now! We are pleased to assist you. Power Clean is formulated for the removal ingrained dirt from heavily soiled floors, it is very good for cleaning newly laid floors and helps to remove cement, adhesive and grout residues. It will also remove several types of stain from all stone surfaces. These types of stains include oil, grease, tea and coffee. Power Clean can also remove recent wine stains and emulsion paint from floors etc. On older floors, polish residues, the buildup of care products, acrylic emulsion and much more can be effectively removed with the use of Lithofin Power Clean. Lithofin Power Clean is best used for a one off clean when preparing a floor or other surfaces before applying anyone of several types of finishes. It is recommended that you thoroughly clean all natural stone surfaces before applying an impregnator, a seal or polish to natural stone. Power Clean is a good choice for such occasions. This product is also recommended for use as a stripper in to remove old finishes or in a more diluted form as an annual cleaner. It is not meant for use as a daily cleaner, when used on bathroom vanity tops and kitchen worktops it should be diluted to 1-part power clean to 10 parts water.This special cleaner is nearly odourless and highly economic. Lithofin MN Power-Clean removes grease and oil, all kinds of general and ingrained dirt as well as floor polish residues, old acrylic emulsions, care products, etc.

Please Note: avoid splashes on sensitive areas such as metal or wood, painted or varnished surfaces, wallpaper, etc. Always test the Lithofin MN Power-Clean in an inconspicuous area prior to use. Apply and evenly distribute Cleaner for Grout Residue Lithofin MN Power-Clean diluted up to 1:10 and wipe the surface.Suitable for use on polished, finely honed, and rough marble and all types of other natural stones.