The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the wireless function is enabled before configuration. MTU(Bytes) - The default MTU size is 1480 bytes. It is not recommended that you change the default MTU size unless required by your ISP.

DoS Protection - Denial of Service protection. Select Enable or Disable to enable or disable the DoS protection function. Only when it is enabled, will the flood filters be enabled. Access Control is used to deny or allow specific client devices to access your network with access time and content restrictions. When you build up a server in the local network and want to share it on the internet, Virtual Servers can realize the service and provide it to internet users. At the same time virtual servers can keep the local network safe as other services are still invisible from the internet. Secondary Connection - It’s available only for PPPoE connection. If your ISP provides an extra connection type, select Dynamic IP or Static IP to activate the secondary connection.Port Range - The port range which the Interior PC access the outside PC. If all are blank or 0, the domain is noneffective. Feature Filter: ทั้งหมด Troubleshooting Configuration Guide User Application Requirement คำถามที่พบบ่อย How to setup Local and Remote Management rules on TL-WR802N/WR810N (standard router and hotspot router mode-new logo) 06-27-2022 35563 Transmit Power - Select High, Middle or Low which you would like to specify for the router. High is the default setting and recommended.

Move the router to a new location away from Bluetooth devices and other household electronics, such as cordless phone, microwave, and baby monitor, etc., to minimize signal interference. Allow Guest To Access My Local Network - If enabled, guests can access the local network and manage it. Key Type - Select the WEP key length (64-bit, 128-bit or 152-bit) for encryption. Disabled means this WEP key entry is invalid.

To Upgrade

When a PC is set to be a DMZ (Demilitarized Zone) host in the local network, it is totally exposed to the internet, which can realize the unlimited bidirectional communication between internal hosts and external hosts. The DMZ host becomes a virtual server with all ports opened. When you are not clear about which ports to open in some special applications, such as IP camera and database software, you can set the PC to be a DMZ host.

MTU(Bytes) - The default MTU size is 1500 bytes. It is not recommended that you change the default MTU size unless required by your ISP. Select Allow the stations specified by any enabled entries in the list to access as the filtering rule. L2TP Pass-through - Layer 2 Tunneling Protocol (L2TP) is the method used to enable Point-to-Point sessions via the internet on the Layer 2 level. If you want to allow L2TP tunnels to pass through the router, you can keep the default (Enabled). Virtual Servers can be used to set up public services in your local network, such as HTTP, FTP, DNS, POP3/SMTP and Telnet. Different service uses different service port. Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port 110 in POP3 service. Please verify the service port number before the configuration. Diagnostic is used to test the connectivity between the router and the host or other network devices.Give a name for the rule in the Description field. Select host_1 from the LAN host drop-down list; select target_1 from the target drop-down list; select schedule_1 from the schedule drop-down list.