Our kitchen splashbacks can provide a beautiful focal point whilst ensuring your walls are protected from splashes, spills and stains, whereas upstands are a great way to conceal the connection between walls and worktops. Whether you’re replacing old edges or installing new worktops in your kitchen or bathroom, find options to suit your project here.

Edge Finishing Profiles | Splashback Accessories | AluSplash UK Edge Finishing Profiles | Splashback Accessories | AluSplash UK

Note, it's ok with three rows, but if you're going taller, you may want to lay them on the floor to work out. Also, because I will be tiling my kitchen splashback directly on to plasterboard and wood, I brushed everywhere with two coats of PVA solution and left to dry. While tiling, it's important to add your adhesive first, then place to trim on top, then continue tiling as normal.

Whether you’re finishing laminate or engineered materials with an edge, explore options to suit your needs here.

Worktop Edgings | Worktop Trims | Wickes

It can also be used when boxing around pipes or columns in combination with our external corner profiles. For this, I used a straight cut and blu tacked all together to check I was happy before dismantling and reaching for my tile adhesive. Another tip is to mark with masking tape of which cut tile is which in case your cut was ever so slightly different.I used to dread working with silicone sealant because if applied wrong, it looks very messy and awful.

Worktop Upstands | Kitchen Worktops Upstands | Wickes Worktop Upstands | Kitchen Worktops Upstands | Wickes

So after marking a notch to cut around my upstand (far right), I poured water in the cutter and carefully cut. And once you've got to the top, make sure the metal pressure piece is resting on the top edge of the tile. This stone texture 12mm compact laminate worktop takes design solutions to a whole new level as a slimline and durable alternative to Stone. However, when faced with planning this awkward section of trim, I was relieved that this was the perfect solution.Then I apply a bead of silicone, My best advice is try to be consistent - not too much, not too little.