the correct procedures could result in a hazardous situation to people and damage to the system. Statement 378 We strongly recommend that you attach the rubber feet to the specified location and place the side of the switch with Cisco As far as installing the mount, it’s easy enough for the average person to handle, though there’s no shame in passing it off to a pro. To install successfully, the mount requires some measuring and leveling, as well as correct placement on the wall. If you go by trial and error, your wall could end up with a number of unnecessary holes. Features Materials Shelving mount: These mounts are generally universal for all video game systems and are ideal for the Nintendo Switch. Most have a long platform with space for games and accessories. Shelving mounts are easy to install and generally come with the necessary hardware. They can also hold the most weight.

Slide the retainer clamp around the AC power cord and position it closest to the connector on the adapter. If you are using an auxiliary power adapter to power the switch which is placed on a mounting tray or a DIN rail mount, you Use the supplied 10-32 pan-head screws to attach the cable guard to the switch. Figure 24. Attaching the Cable Guard to the Switch

Remove the four rubber feet from the adhesive strip, and attach them to the locations indicated at the bottom of the unit. On the downside, since these mounts only hold the Nintendo Switch, you might be hard-pressed to find an appropriate place to store your Joy-Con controllers.

Read the wall-mounting instructions carefully before beginning installation. Failure to use the correct hardware or to follow A. Unfortunately, there aren’t many Switch wall mounts on the market, and the ones that exist require hardware and some drilling. If you’re concerned about damaging your wall, ask an expert to do it for you. They know how to install the mount with minimal damage to your wall. An expert can also get it level the first time and so avoid drilling multiple unnecessary holes.

Secure the switch to the desk mount using the two 10-32 Phillips pan-head screws provided. Figure 10. Mounting the Switch Under a Desk or Shelf Swing arm Wall Sconce - Brass finish - On/Off Switch & Plug-in Option - Retro - Loft - Industrial - Minimalist - Lamp - UL Listed Place the DIN rail mount on the DIN rail, making sure that the top of the DIN rail mount clip hooks over the top of the DIN Place the switch on to the DIN rail mount and secure it using the two 10-32 Phillips pan-head screws. Figure 15. Securing the Switch to the DIN Rail

Modern Wall Lamp Swing Arm LAURIE Wall Light Sconce, Cylinder Reading Sconce , Handmade Contemporary Brass Spot Light Bedroom Reading Light not support autonegotiation, you can manually set the speed and duplex parameters. Connecting devices that do not autonegotiate Insert the three 8-18 Phillips pan-head screws in to the slots on the mounting tray, and tighten them. Figure 2. Attaching the Mounting Tray to the Desk or Shelf Use a 0.144-in. (3.7 mm) or a #27 drill bit to drill three holes, 1/2-inches (12.7 mm) deep in the desk.Universal Double Controller and Headset Wall Mount, Xbox Series X/S, One controller, PS5 controller, Nintendo switch controller Do not wall-mount the switch with its front panel facing up. Following safety regulations, wall-mount the switch with its the cable. The plugs and caps protect the module ports and cables from contamination and ambient light. If you’re a renter, ask the landlord if you’re allowed to install the Nintendo Switch mount, because you’ll need to drill holes into the wall. On the downside, most shelving mounts have an industrial vibe and so aren’t the most attractive options. They also take up more horizontal space, which doesn’t exactly make it a space saver in some respects. Installation

Do not remove the dust plugs from the modules or the rubber caps from the fiber-optic cable until you are ready to connect To prevent ESD damage, follow your normal board and component handling procedures when connecting cables to the switch and Crimp the grounding wire in the barrel of the grounding lug. Verify that the ground wire is securely attached to the ground Cubic Charge Nintendo Switch Stand | Paintable Model | Gaming Decor Office Desktop | Switch Stand | Gift for Gamer

The switch 10/100/1000 port configuration changes to operate at the speed of the attached device. If the attached ports do Use a wire-stripping tool to remove approximately 0.5 inch (12.7 mm) ± 0.02 inch (0.5 mm) of the covering from the end of Secure the switch to the mounting tray using the screws provided. Figure 4. Securing the Switch to the Mounting Tray Switch Off Mobile Phones Sign, Notice, Warning - Ideal for business, offices, schools, hospitals. Waterproof Acrylic with drill holes Looking for a new setup for your Nintendo Switch? It’s old news to place your system on a table or entertainment center. At almost 40 square inches, the Nintendo Switch takes up a considerable amount of space, especially in a small room. Modernize and optimize your space by installing a Nintendo Switch wall mount.