It features a durable metal pole that is strategically balanced to help you stay comfortable. On one end of the device, there’s a comfortable arm cuff. It sits below your arm to counter-balance the coil and control panel. There’s some light padding to prevent irritation on your skin and openings to attach a strap if you want some added stability. Not Many Settings – Even though the simplicity of this device adds to the charm and accessibility, it also can be limiting depending on your interests. The standard modes, while effective, can only detect so much, and the two knobs for sensitivity and discrimination adjustment don’t give the device the greatest range or versatility. I really hope that this article has given you enough useful information! I really want you to be able to always get the best out of your detector, and reading your machine is crucial in that sense… This is a VLF, or Very Low Frequency, metal detector. This technology is pretty common in metal detectors because it works well to find a range of different metals.

Bounty Hunter Tracker IV Review (2023 UPD) Metal detector Bounty Hunter Tracker IV Review (2023 UPD)

If you start getting chatter/falsing on the machine, slowly reduce your sensitivity until you reach a level where you don’t hear anything. This can be useful for getting an idea of how deep a target is, as well as how large the target is. The coil can be changed to others at will. Target identification scale, from 0 to 99, helps to determine whether to dig into the signal or not. The operating frequency is 7.69 kHz, which is good for searching for coins and artifacts. The Pro mode comes with more audio information about the target depth and composition, as well. The deeper the targets, the fainter the tones, and you may also hear additional snapping sound depending on the metal’s composition. The digging process is exciting but is also painful if done more than necessary! Being able to predict your target is a necessity at a certain point.It runs on a fixed frequency of 6.6kHz and is powered by two 9V batteries. The 8″ coil is waterproof and it comes with a 5-year limited warranty that covers defects. You will find the interface easy to use, making it among the best metal detectors for kids, and the knob controls allow you to dial in just the right settings for your needs. The sensitivity is the adjustment you will make at what depth you would like to return a signal. Most will want to go as far into the ground as possible. They will want their sensitivity control to be on all the way. When the coil moves away, the audio response becomes quieter. Some model will also change the pitch of the tone in relation to the target.

Bounty Hunter TK4 Tracker IV Metal Detector Review - Lifewire

The other purpose of sensitivity is to find smaller objects. There can be a problem with having the sensitivity up that high. It will detect the tiniest trace of minerals in the ground. This is why the best to listen to the audio tone as the first indicator of whether to dig or not. 3. The depth

The search modes on this Bounty Hunter are not object-specific, so there are no Coin, Relic, or Jewelry modes. However, you do have All Metal Mode which has no discrimination as it will provide one audio tone when it detects any type of metal. This mode is especially helpful when you want maximum depth. You can read the device with its two audio modes – Pro and Standard … You can use both modes with the three search moves … If you are looking for simplicity, you have found it. There are two knobs and a switch on this model. There is no digital target ID, iron audio, or depth indication available in an analog detector, making it much easier for children and entry-level detectorists to learn to use. Trash items (ferrous, iron) have a choppy and broken tone, and items that can prove to be valuable have a solid and clear tone.