Anchor and fix the supply pipe in place using pipe stakes and wall clips. The ideal placement of stakes and wall clips for the main supply pipe is one every 50-150cm. elbows, tee connectors, stop ends, etc. - Based on the plan's requirements, choose 13mm connectors to guide the pipe around the garden and terminate pipe runs.

The main supply pipe should ideally be laid within 20cm of the location of micro sprays if you have opted for the preassembled sprays on a stake with a short length of micro pipe. The longest length of micro supply pipe we want to use is 30cm.

Contents

Water Timer - The ideal timer for this project would be the Claber Dual Select, as it allows the irrigation system to be split into two zones with just one computer to control both lines.

TOP TIP: If you pierce a hole in the wrong place, use a micro blanking plug (aka Goof Plug) to close and seal the hole. If using pre-assembled micro sprays on stakes, the effort in the previous step has already been made for you. Use the hole punch to pierce the main supply pipe, insert the tube adaptor already connected to the micro pipe into that hole, and then position the stake to suit your requirements.

SHIPPING AND RETURNS

for connection to the supply pipe, the base and 200mm dia. 650mm long PVC guard tube and an optional cast iron frame and cover. Our products include Drip irrigation, driplines, drippers, sprinklers, microsprinklers, pop up sprinklers, mini sprinklers, Tap timers, irrigation controllers, solenoid valves, solenoid valve manifolds, skid sprinklers, hose, hose fittings, tap fittings, hose reels, hose trolleys, pumps, tanks, and most irrigation related equipment.

Metres of 13mm Irrigation Supply Pipe - This is the primary carrier of water and runs past all containers we wish to provide water for. Lay the main supply pipe around the area to be watered. The tube will be more manageable if warmed in the sunshine before use. Initially, position it with weights until it relaxes.

Pipe Stakes and Wall Clips - Available for 19mm, 13mm and 4mm pipes, this secures the pipe in place. Use the stakes to secure the pipe to soil or wall clips to secure the pipe to walls, fences and posts. For many customers and contractors it is preferable to undertake a full or partial installation of a system themselves. We are please to offer a service of design and supply or partial installation for most types of irrigation systems. These systems would be designed to provide the same quality of Irrigation system we would provide in one of our own installations be it a private garden Irrigation system or a Bowling green irrigation system. Irrigation Hole Punch - Used to pierce holes in the main supply pipe to connect the microtube of the micro sprays to the 13mm irrigation supply pipe. It is also possible to insert the micro spray heads directly into the main supply pipe by simply punching a hole using the irrigation hole punch, and then inserting the inlet of the micro spray into the punched hole. A micro spray irrigation system consists of a simple network of pipes with low-volume micro-sprays attached. These micro-sprays have been designed to irrigate or water small to medium size planting areas. The low-volume sprays installed for landscape and horticultural applications deliver a fine water spray covering one to three metres. Sprays used for agricultural applications, such as watering under vines and orchards, have a larger spray radius. A micro-spray irrigation system can provide efficient and precise water delivery to targeted areas in your landscape, nursery or orchard.

With a scale map of your garden, draw a path from your water source past all the micro sprays you have planned. This path can branch off in different directions (using tee connectors) and do 90° turns around obstacles (using elbows). The idea of a watering system is to be hidden, so consider the best route for the pipework to follow to ensure it is out of sight. This could be underground (up to 5cm), under mulch, hidden behind bushes, or neatly pinned to a wall or fence.Metres of 13mm Irrigation Supply Pipe - This is the primary water carrier and will run past all the micro sprays we want to use in our irrigation system.