The Kewtech KT63 Plus Multifunction Tester is a simple-to-use, six-in-one, 18 th Edition multifunction tester. Kewtech KT63 Plus 6 in 1 Multifunction Tester Key Features The Thermal Print Head has a matrix of very small dots, each of which can be heated individually at great speed. As the label passes over the Thermal Print Head, heat is transferred onto the Label which in turn reacts with a layer of paper which has been impregnated with dye. This is the chemical reaction mentioned above and in turn produces the final image on the label.

Furthermore, the Kewtech KT63 Plus Multifunction Tester includes a UK specific RCD test with auto-test memory which will display all six readings on the display for ease of reading. The Kewtech KT63 Plus Multifunction Tester also includes a memory for test lead resistance compensation. While we do carry out high intensity testing on various printers from time to time, we don’t use these printers on a regular daily basis, so we are unable to offer any specific advice on how often you should clean the head, however I would certainly recommend every 3 rolls to begin with and take it from there. There are three ways to commence testing with the KT63 Plus, a single press of the test button, continuous testing through handsfree use of the test button, or by utilising the test button in a test probe. A continuous live monitoring function prevents damage to the tester and PFC / PSC measurements are made easy as there is no need to alter the test probes. Notably, these PFC / PSC results are displayed to the user in real time alongside the loop readings. The Kewtech KT63DL Multifunction 5 in 1 Tester is the updated version of the popular KT63. Easy-to-use, this multifunction tester can measure up to five parameters and isergonomically designed, witha dedicated function button to enable hands-free operation. Selecting the required test and/or function is easy using the Kewtech KT63DL Multifunction 5 in 1 Tester’s colour-coded rotary dial and function buttons. This ergonomically designed multifunction test also supports hands-free operations and includes a dedicated function button for this purpose. Additionally, the Kewtech KT63DL Multifunction 5 in 1 Tester’s IP65 rating makes it suitable for use in rugged environments.Conduct full no trip loop testing (with a low likelihood of RCD uplift and noise interference) on RCD types above 30mA

The Kewtech KT63DL Multifunction 5 in 1 Tester is an easy-to-use, ergonomic and economical test instrument. Kewtech KT63DL Multifunction 5 in 1 Tester Key Features It is important to note that not all models offer every single test detailed above. Testing requirements vary depending on the installation and its environment so not all tests are always necessary. Direct Thermal Transfer Printers do not require any form of ink, toner, wax or even a ribbon, printing is achieved by using heat applied to the Print Head, the magic happens via a chemical reaction on the label itself. The Kewtech KT63DLcan conducta variety of tests for parameter measurements including continuity, insulation, loop impedance, PSC/PFC and RCD. Features of the Kewtech KT63DL Include: The Kewtech KT63 Plus 6 in 1 Multifunction Tester is an exceptionally uncomplicated 18th edition testing device, harnessing the versatility of a multifunction tester in conjunction with a tactile user interface. The KT63 Plus can perform a formidable array of tests, such as:In addition to this, the Kewtech KT63 Plus Multifunction Tester can conduct PFC and PSC measurements without the user needing to alter the test probes. Its continuous live monitoring also prevents blown fuses and PCBs. The new updated version of KT63, the Kewtech KT63DL Multifunction 5 in 1 Tester is easy-to-use and capable of measuring up to five parameters including continuity, insulation, loop impedance, PSC/PFC and RCD. There is much debate on how EV supply equipment should be tested. Some say that it is installed equipment and therefore the installation testing needs only to be done up to the equipment. We take the view that the installation including the EV charger should be tested. This is because the EV charger will, in the vast majority of cases, be located outside the equipotential area of a building and therefore has significant additional risks. As mentioned above, the Kewtech KT63DL Multifunction 5 in 1 Tester is able to measure a variety of parameters and includes a variety of tests for this purpose: