If you are using multiple batteries, it can also help to keep them all at the same level of charge.

Connect the battery to the charger, and the Battery Level LEDs in an array blink successively. The charging time for one battery is approximately 50 minutes. After the battery is fully charged, the four Battery Level LEDs are off. Detach the charger after charging is complete. Comes with an Patch Antenna (connects to the bottom two RPSMA connectors), and two onmi directional stubby antennas that connect to the top two RPSMA. Similarly, it is not recommended to charge your batteries to 100% before storage. DJI drone batteries automatically discharge to protect the integrity of the battery cells. In FPV drones, the battery automatically discharges to about 97% when it has been idle for a day. By day five, the battery self-discharges itself down to 60%, its ideal storing range. However, when I flew the FPV drone in broad, sweeping curves high above the ground, that queasiness turned into elation as it felt like I was soaring like a bird. DJI FPV drone review: Camera quality It’s worth noting that over-discharging or reaching 0% is one of the biggest enemies of your FPV drone battery. Normally, DJI advises that you land your drone when the battery level is about 15% or greater to maximize its life. But for FPV flights, depending on how far you are from the launch point, you may want to initiate RTH when the battery level is about 20-25%.When used with the DJI 30W USB-C charger, the battery charging hub can fully charge one battery in approximately 56 minutes and one Intelligent Flight Battery Plus in approximately 78 minutes. After the battery is fully charged, the corresponding LEDs will change to solid green. The battery can be disconnected from the charging hub when charging is complete. The batteries of both drones are designed as the DJI standard “Intelligent” flight batteries. This means that the batteries have self-discharge functions that activate when they are kept in storage for a prescribed period, making the batteries last longer. This can help prevent them from becoming damaged or degraded over time. Additionally, since the hibernation mode reduces overall flight time, it can also help conserve power if you’re trying to extend your drone’s battery life on a single charge. Why is My Drone Battery Not Charging? First, make sure that you fully charge your batteries before each flight. This will help to ensure that they have enough power to last for the entire duration of the flight.

Using a battery charging hub: When used with the DJI 30W USB-C charger, the battery charging hub can fully charge one battery in approximately 56 minutes and one Intelligent Flight Battery Plus in approximately 78 minutes. Both drones come with AirSense, the DJI feature that uses an ADS-B receiver to warn the drone pilot of any nearby manned aircraft. This feature has become a standard in modern DJI drones and is nice to have if you’re planning to fly in an area with lots of air traffic. Price Devices will take longer to charge if both ports are used for charging simultaneously. Tested in a lab environment and should be taken as reference only.Insert the batteries into the charging hub, connect the USB-C charger or PD fast charger to the USB-C port of the charging hub, and the Status LEDs in an array blink successively. The battery can be fully charged in about 1 hours and 22 minutes when used with the DJI 18W Charger. After the battery is fully charged, the corresponding LEDs will change to solid green. The battery can be disconnected from the charging hub when charging is complete.

Finally, keep an eye on the battery level indicator on your controller or mobile device. This will give you a better idea of how much power is remaining in the battery so that you can land before it runs completely out of juice. DJI FPV Battery Repair As the aircraft will naturally generate heat when charging the battery mounted on the aircraft, the charging power will be limited, and the charging time will be slightly longer than when using the battery charging hub. You can buy replacement batteries from Swellpro or from many retailers that sell electronic devices and accessories. There Could Be Something Wrong With the ChargerThere are two main reasons to use DJI FPV battery hibernation: to save power and to extend the lifespan of your batteries. If you know you won’t be using your drone for a while (for example, over winter break), then it makes sense to put it into hibernation mode so that the batteries don’t get completely drained. Data is tested under different standards in an outdoor open environment without interference. Only to serve as a reference for the max one-way communication distance without considering RTH. Please pay attention to any RTH prompts during actual flight. Second, avoid taking too many photos or videos while the battery is low. The more time that the camera is active, the faster the battery will drain.