Hisense TVs can also control your soundbar through the HDMI ARC connection. After connecting the two with an HDMI-certified High-Speed 2.0 cable go to your TV Settings > Sound > Speakers > ARC. This turns off your TV speaker and enables HDMI ARC. It is easy to jump to conclusions when you notice something’s wrong with your soundbar. You don’t want to do this as you might probably cause more damage to your soundbar than it has already sustained. Sony TVs can be connected to a soundbar through the HDMI ARC connection, an optical digital audio cable only, or with both an HDMI and optical digital audio cable. All of the setups are the same as the instructions listed above. When switching the audio output setting, you’ll select ‘Audio System’ for all setups. After connections have been made and settings have been adjusted, you may need to adjust the soundbar’s volume to optimize the sound now that it is controlled through the TV. After the reset, you still need to properly re-establish the connection between your TV and the soundbar to guarantee seamless and effortless functioning. How to Reset Your LG Soundbar Without Remote

For the best audio possible, you can also change the ‘Digital Audio Out’. Go to Settings > Sound > Advanced Settings > Digital Audio Out > Dolby Digital Plus, and then connect using an optical cable. Conclusion Connectivity and pairing trouble is more common in LG soundbars, especially when you’ve connected to more than one foreign (new) device before reconnecting to your TV.With an HDMI ARC connection, your soundbar’s source will automatically change to TV ARC, then you can use the TV remote’s right direction on the direction pad to activate/deactivate Anynet+, which only works with an HDMI ARC connection. Press the “ Input” and “ Bluetooth” buttons on your LG soundbar and hold them in place for 10 seconds. After you release the buttons, the soundbar will reset. Method #2 Most people don’t know it is possible to reset your LG soundbar without the remote. However, It is quite possible, and it’s a very straightforward process. Let’s take a look at the different methods of achieving this. Method #1

When utilizing HDMI ARC to connect to your Hitachi Roku TV remote, you’ll want to head to TV settings > Audio > Audio Preferences. Then, set the ‘Audio Mode’ to ‘Auto (DTS)’ to connect to your soundbar automatically. Also, select ‘Auto-detect’ in the S/PDIF and ARC settings. Using HDMI ARC, you will connect your soundbar’s ‘HDMI OUT’ or ‘HDMI OUT (ARC)’ to the ‘HDMI IN (ARC)’ on your TV.If you don’t immediately hear the TV’s sound, then you need to go to your TV’s sound or audio settings and turn off your TV speaker. It should be under ‘TV speaker’, ‘speaker list’, or something similar. On this same list, you should see an option for “HDMI Arc” or something similar. Select this option to tell your TV to route the audio channel through the soundbar. When Using Optical: If your TV and soundbar have both options, you may be wondering which one you should be using. If so, there’s some more discussion about that in another one of our articles. Once you’ve decided which on to use, keep working through the directions below. As you can see, controlling your soundbar with your TV remote is a fairly straightforward process. You only need to make the connection to your TV and adjust your settings and sound as necessary.