Can you confirm what size I'll need for a new Honda Forza 300? The scooter cover appears to be too short in length? August 11, 2018 I've noticed dimples on the inside of the bivvy after heavy rain or when the inside gets wet. Is this normal? What size cover do I need for my Vespa scooter with topbox. Do I measure the height to the top of the mirrors (as this is 137cm) or to the height of the topbox which is 105 cm. The length is 203 cm and the width 90cm across the mirrors but 44 cm across widest part of body (footrests) November 6, 2018

To optimise the long term effectiveness of our Aquatexx EV® bivvies and accessories, we recommend that our Revive Shelter Complete Care Kit is used at regular intervals, to both clean and re-proof the outer fabric of the bivvy. I've bought an accessory, such as a skull cap, to use with my older Aquatexx® bivvy, but the colours are different. Is this a fault? Does the cover have slots at the wheels that you can use when using a chain to secure thebike? August 9, 2018 If the waterproofing quality of the canvas has been affected, the damage can usually be rectified by using "AquaTex" impregnator spray. The awning must be thoroughly dry and clean before application. "AquaTex" will not function on dirt; therefore, the canvas should be sprayed on the inside of the awning. If there are any leaks in the material, "AquaTex" will penetrate and be effective on the outside as well. If the material is very dry, you may notice some discolouration on the outside. To regularise the colour, simply spray on the outside as well. DON'T FORGET it is most important to clean the awning inside and out BEFORE impregnation as any deposits on the material will negate the properties of the "AquaTex". For example, the nicotine from cigarettes will affect the material and the waterproofing. Isabella recommends usingtheir IsaClean products to ensure the canvas will be thoroughly clean safely. A motorcycle exhaust and engine components can be far hotter than 150 degrees directly after use, so the cover should not be used until the motorcycle has cooleddown.Please see our Care and Maintenance section for more information on how to manage condensation inside your bivvy. The front of the shelter can be completely removed to open it up for maximum visibility; alternatively, you can customise the three vents on the front and the two super large vents at the rear and sides to optimise ventilation. Yes, this is totally normal. The coating applied to the inner of the base fabric is designed to minimise condensation. Small dimples may form on the inside of the shelter as the inner coating absorbs moisture and repels it through the outer fabric. This will be more apparent during periods of heavy rain or humid conditions when condensation build up would normally be at a high level. This is a temporary physical effect and will disappear when dried out.

You can further enhance this fishing shelter with the addition of a Skull Cap or Inner Capsule (both available separately). If the waterproofing quality of the canvas has been affected, the damage can usually be rectified by using "AquaTex" impregnator spray. The cabin/ awning must be thoroughly dry and clean before application. "AquaTex" will not function on dirt; therefore, the canvas should be sprayed on the inside of the awning. If there are any leaks in the material, "AquaTex" will penetrate and be effective on the outside as well. If the material is very dry, you may notice some discolouration on the outside. To regularise the colour, simply spray on the outside as well. DON'T FORGET it is most important to clean the cabin / awning inside and out BEFORE impregnation as any deposits on the material will negate the properties of the "AquaTex". For example, nicotine from cigarettes will affect the material and the waterproofing. It is a good idea to have a can of "AquaTex" handy at all times as it has a wide variety of uses besides impregnating your cabin/awning. For instance "AquaTex" can also be used on stiff zips, removal of stains and, even impregnating your shoes or boots. AquaTex colourless waterproofer for cabins / awnings I have a lexmoto FMR 125, what would be the best product to use for that type ofbike? August 25, 2017 Yes, Aquatexx EV® fabric is 100% waterproof due to a combination of Teflon® fabric treatment and a specialist technical coating. This causes water to bead and run off, keeping the outer fabric drier for longer. It provides a guaranteed level of water required before penetrating the fabric. The higher the mm rating, the more waterproof a material is, allowing it to be exposed to more water before starting to soak through.

I've noticed that in longer rain showers or consistent rain that the beading effect is not so obvious. Is my bivvy still waterproof? What size cover do you recommend for a 1972 BMW R60/5 with tall windscreen andtopbox? August 9, 2017 It is a good idea to have a can of "AquaTex" handy at all times as it has a wide variety of uses besides impregnating your awning. For instance, if you experience difficulty in drawing your awning beading through the caravan channel, spray the channel and the awning will slip through easily. "AquaTex" can also be used on stiff zips, removal of stains and, even impregnating your shoes or boots. Look for yourself how easy it is: Warning: Aquatexx EV® Tempests represent the best in design coupled with the highest performing materials and components to give the best possible angler experience through all weather conditions. Aquatexx EV® material registers a 25,000mm hydrostatic head rating, the highest of any fishing shelter on the market. You may have heard the term ‘Hydrostatic Head’ or ‘HH’ when searching for your next bivvy, but what does it actually mean?