Let’s imagine that it’s the blue cable that is not working. In such a case, you should then see that the Blue lights will light up, proving that they work – which means you have a bad connection somewhere else. With this knowledge in mind, rebuild the system step-by-step, adding the controller (and extension cables if you have them) and see which component makes the Blue lights stop working. Interference from other devices can cause connectivity issues with your Ksipze LED light strip. Try turning off other Bluetooth devices in the area or moving the light strip to a different location to remove all interference.

You have paint on them! Very simply I have seen this issue hundreds of times, if you have a cool white strip and then in random sections of, perhaps, 50mm you see warm white (or they appear to be completely ‘off’) then this is because they have been painted on. Most LED strip lights offer many color options, allowing you for color-changing between red, green, blue (often shorthanded to RGB), and other colors so you can adjust the color temperature depending on your mood. Others have multicolor options so you can display more than one color at a time. White LED lights are also a popular option. Brightness The same with option B: if +ve and -ve and are touching somewhere, then the strips will fail within hours and LEDs will be be damaged. You may even smell burning and this could be a fire hazard, Once you have all the necessary items, follow these instructions to install your Ksipze LED light strip: Here are some of the most important factors to consider when deciding which LED lights are best for you. LocationStep 2: Cut the Ksipze LED light strip to the desired length using sharp scissors or a sharp knife, making sure to cut along the designated cut marks.

Note: Make sure the power is off when you cut the strip lights and you need to buy some connectors to connect the Strip after cutting it. Remember, do not cut the light strip randomly to avoid damage. How to Install Ksipze Led Light Strip on TV If you’re having issues connecting your Ksipze Led Light Strip to Bluetooth, try the troubleshooting tips below to fix the problem: Before you begin, it is important to have all the required accessories and tools, including the Ksipze LED light strip, power adapter, scissors, and a clean, dry surface on which to install the strip.

The built-in mic makes the LED lights color-changing with ambient music. You can easily create a party atmosphere with the Ksipze Led Light Strip. How Do I Reset My Ksipze Led Lights? This happens a lot when the painters come in and paint and do not know that there are LED strips where they cannot see them (inside a coving, for example). Then when you turn them on, bam! – you see the faults. Depending on how much paint there is, the strips can sometimes be saved! You can wipe the paint off the strips. Do not use any water-based products or that will damage the LEDs. You can also scrape the dry paint off the LEDs with a fine knife. Make sure the strips are turned off. I have done this successfully many times, and the strips worked perfectly afterwards. Remember to always follow safety precautions and consult with a professional if necessary to avoid damaging the Led Light Strip. Ensure that you have the latest version of the app installed and that your device’s Bluetooth is turned on and functioning properly. Restarting your device or resetting the LED light strip could also help to resolve the issue.

A software issue with the app or Bluetooth connection itself may also be responsible for your device not connecting to Bluetooth. If your Ksipze Led Light Strip isn’t connecting to Bluetooth or you’re experiencing any of the issues mentioned above, try the troubleshooting tips below to fix the problem. How to Fix Ksipze Led Light Strip Not Connecting to Bluetooth The cut points are usually located every few inches or so, depending on the model of the LED light strip that you have. How to Cut Ksipze Led Light Strip Make sure that you have the latest version of the HappyLighting app installed and that your device’s Bluetooth is turned on and functioning properly. If the app is not working correctly, try uninstalling and reinstalling it. Interference from other Bluetooth devices may be the reason why you’re having issues with your Ksipze LED light strip. Turn off other Bluetooth devices in the area or move the light strip to a different location to remove all interference.To cut Ksipze LED lights, locate the nearest marked point on the Led Light Strip then, using a pair of sharp scissors cut along the marked line carefully, making sure not to cut through only the marked points. Step 3: If there’s a reset button on the remote control or the Light Strip, press the reset button to reset the Light Strip. Final Words LED lights have a wide range of applications since they are easy to install almost anywhere. Here are some suggestions for how to use LED lights in your home: