The Buckle Boss is very useful for the more high functioning user, as it completely obscures the release mechanism, but can be easily removed by sliding a key or slim object between the slots. Our belt guard comes in 2 neutral colours black or light blue as we don’t want to draw their attention to the belt buckle and the red button, we want to distract them from it.

While the accessories would not necessarily invalidate cover, we would always urge drivers to act responsibly and to put safety first.

It’s attached to the lap and shoulder straps of the vehicle seatbelt and inserted in the respective guides on the booster seat. A spokesperson for RiveMove told us: 'Before launching our product into the market we carried out numerous tests in CSI Spa (Italy) in accordance with regulations ECE R129, with which groups II/III car seats are homologated, demonstrating its safety. Buckle-upp is the perfect equipment for parents with small kids who are concerned of their safety in the car.

It's a fabric harness that fits over the five-point harness of the child seat, reducing the size of the arm holes to make it much harder for arms to slip out of shoulder straps. Turning off the personalized advertising setting won’t stop you from seeing Etsy ads, but it may make the ads you see less relevant or more repetitive. NOTE: Can only be used on car seats that feature a splitter plate on the harness, which is found on the backside of the car seat(see photo below). R44 and R129 both make it mandatory for a rear-facing child car seat to carry a visible airbag warning label on the inner surface of the seat, near where the head sits.However, strapping in your child with an additional belt means you’ll have to release a second buckle, and you won’t be able to release your child in one action (a requirement of both R44 and R129 car seat regulations). Two ways to release the buckle after installation of the buckle guard: Slide thumb under the guard and push the release button or u se the provided tool to open the buckle.