The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. I've been able to reduce at almost 90% drying the filament at 60° for near 4h, and with 1mm->3mm retraction and 40mm/s -> 55mm/s retraction speed. I've read that some people have printed PLA+ as low as 170/180, but seems wierd as PLA+ should be printed at a bit higher temp than regular PLA. ESUN has developed this PLA 3D printing filament to excel in a broad range of printing applications.

Minimum tolerance and low warping to ensure consistent feeding and stable prints, no bubbles, less stringing, extremely high printing successful rate. Their premium PLA+ filament range is specially designed to have high toughness, no bubbles, no warping, and to avoid clogging. If you choose to decline, then we will only use functional and analytical cookies and you will continue to see random advertisements. Nur das Filament sieht ganz anders aus, nicht so schön wie auf dem Foto und leuchtet auch nicht wirklich.You can read all about the cookies we use, how they work and how you can adjust your preferences in our Cookie Policy. Finance is provided by PayPal Credit (a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH). By accepting these services, we are able to show you videos or other media content hosted by external providers. PLA+ is a personal choice within the Creedo3D team and we are happy to tell you more if you have questions. I know this is an old thread but I found it trying to find some answers and saw that it didn't have much as far as specifics so thought I would add my two cents for the next person who comes along.

Good strength, rigidity, toughness balance, strong impact resistance, very suitable for functional parts printing;Approved by FDA, safer to use;Can be used for conceptual model, rapid prototyping. Then you say the settings "shouldn't" change much from standard, suggesting that you don't have any personal experience. I tried printing using fresh spool with Prusament PLA profile, but it was stringy and i noticed popping sound during print. In general, I thought this filament was just Anti-Prusa, as it will only behave with my AniCubic KobraMax, but then again it runs PLA with a nozzle temp of 230C and bed at classic 60C. In my experience, eSun PLA+ makes a hot glob on the nozzle every time with the generic PLA settings.If I print with my custom "quiet" settings, which is the generic PLA settings with the speed turned down so no movement is faster than 30mm/s, then it does print. I know lots of people tend to print PLA at 190-ish, so 20c hotter would be ~210, that's the standard PLA temp profile in slic3r.

High Speed Printing】PLA+ meets the demands for high-speed printers and keeps outstanding performance at high speeds. The increased strength and toughness makes it an excellent choice for a variety of printing applications.eSUN filaments are made with virgin materials, biodegradable and eco-friendly are non-toxic and low odour.

Reinforced spool with bigger inner diameter to allow smoother pull from extruder, unlike most black spool on the market which has a tighter inner diameter. This new standard is titled “Specifications for the use of Poly(lactic acid) (PLA)-based filament in additive manufacturing applications. Correct my previous message, I dry at 40°, it's important because 60° will cause vetrification of this filament.Made with starch raw materials derived from renewable plant resources, eco-friendly and non-toxic, no harm to to human and the environment. Die Kommunikation war einwandfrei ich wurde kontaktiert, da esun die Kunststoff Rollen auf Pappe umstellt und konnte mir noch aussuchen welches Material ich bevorzuge. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging .