Despite its strong 595 lb clamping force, the No-Mar clamp pad ensures a firm grip without causing any damage to your materials.

Offers a new means of integrating adjustable clamping into a jig securely and out of the way of blades and bits.

The Losmandy style dovetail plate 240mm PLUS is designed to let you install your telescopes on mounts with this plate. These are values which ideally would be at 0 but as our test optics are all curved lenses, there will always be astigmatism and coma present. Now you can build fences of any height, mount workbench extensions easily, affix jigs to reference surfaces or even create your own track saw system, thanks to the dovetail slot convenience offered by these new clamps. Invest in the MatchFit Ratchet Clamp AP by Microjig today, and unlock a new dimension in your woodworking journey.

Providing you with comfort while using it, the MATCHFIT Dovetail Clamp Pro is a woodworker’s ultimate tool. The installation on the Skywatcher HEQ5 is done by replacing the original upper flange with a new flange ( supplied with the terminal ) that enables the installation of the Vixen Losmandy - large.Thus a parallel mounted guiding telescope can be set up very easy and enables long exposure astrophotagraphy with autoguiding.

Again, these are measured by the interferometer when we take measurements of the optical surface after adjustment. The big dovetail clamp Vixen+Losmandy PLUS for HEQ5 allows you to install, on the Skywatcher HEQ5 mount, telescopes with Vixen and Losmandy dovetail bars. I have a question about the Matchfit clamps and Festool/Makita track: can these clamps replace the dedicated track clamps used to hold down the track? The long ratchet handle provides superior leverage making them easy to use for everyone even those with hand grip issues. I have never used a track before, and thought that this would be a good way to line up router-cut dados.I saw a video where someone tested the pressure needed to pull the clamp through, mdf failed, but ply and hardwood was good. The bits they supply leave a channel that is not sharp and needs no sanding, if set at the correct depth.

Because of its powerful grip, you can feed material over the cutter head without having to apply too much downward pressure. Does seem expensive for what you get, as I felt the same when I opened the kit box, but in use, and being able to stick tracks anywhere you want, it really does come into its own.The big dovetail clamp Vixen+Losmandy PLUS for EQ6 allow to install on the Skywatcher EQ6 or N-EQ6 mount telescopes with Vixen and Losmandy type dovetail bars. It’s recommended to put the bolt towards the box side as shown in the pictures above and not to block the USB ports and status indicators. Universal dovetail clamp suitable for all optical tubes which are equipped with a standard 44mm dovetail rail (Messier/ES/GP/Vixen). The Maxi dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance), or to install it on the mounts instead of the original. The PV rating (Peak To Valley) is a measurement from the highest point (Peak) to the lowest point (Valley).