Dryzone Damp Proofing Cream (DPC) - 310ml - High-Strength Injection Cream for Rising Damp Treatment. BBA & WTA Approved

Product Information

Had a house renovated, builders raised my driveway very high and caused major damp problems in my house, we used no hydro taking slurry on the concrete floor and walls to above the ground level. No Hydro DPC Cream is simply injected into pre-drilled holes along the continuous mortar line 4 inches apart. Only products and systems that have passed a series of comprehensive assessments – including laboratory tests, on-site evaluations, quality management checks and inspections of production are awarded an Agrément Certificate. Consider using a damp-proof membrane if you need to replace the wall plaster before the wall is dry.

No Hydro Damp Proof Cream is an easy-to-use, high-strength damp proofing cream, designed to provide an effective barrier against rising damp.You can drill from inside or outside the building, whichever is more convenient, although sometimes it is easier to judge the levels from inside. No Hydro Damp Proof Injection is extremely easy to apply and does not require much technical knowledge or experience. Dryzone is a special silicone based damp proof injection cream that treats and protects against rising damp. Easy to install, Rempro DPC cream is injected into the mortar joint between the brick course via 12mm holes created by the user in the affected walls. The injection cream has a special consistency that allows the active ingredients to optimally penetrate the wall.

Installing a chemical damp proof course of water-based silicone fluid - damp proof cream - forms a protective barrier, effectively stopping rising damp from entering the building and damaging walls. Squeeze the gun and trigger and back fill each hole fully with DampSolve cream to within one centimetre of the surface.Rempro Damp Proof Course (DPC) Cream is a high strength ready-to-use silane/siloxane injection cream which has been designed to create an effective barrier against rising damp in existing walls.

Construction Chemicals Envirosafe One Shot Damp Proof Injection Cream is a highly effective silane/siloxane based cream for installing a chemical damp proof course. Independently tested by the BBA and classified that this product will remain effective against rising damp for at least 20 years.An advanced, ready-to-use, chemical damp proofing formula which forms an effective moisture barrier within the wall. It is advisable to leave walls injected with DampSolve to dry for as long as possible, and for at least 14 days, before removing excess salts and commencing replastering. After treatment, we ensure all your walls where a DPC has been installed are replastered, leaving your walls clean, and ready to be decorated. No High-Pressure Injection Pump Required: Unlike traditional damp proofing methods, this injection cream doesn't require a high-pressure injection pump to deliver the solution.