Whenever your drilling into brick or concrete you need to clean out the hole before you fit a wall plug and screw your bolt in.

The HDTV-DXL is Invisions heavy duty double arm bracket, engineered for strength and utility, constructed from heavy gauge reinforced cold rolled steel. To mount your bracket hold in position and insert the supplied screws ‘B’ into washers ‘L’ and fully tighten into the wood using a ratchet and 12 mm socket or Socket (12mm side) and Allen key ‘F’ – see diagram ‘D’. As long as the vesa measurements match up with any of the measurements Invision cover, then yes definitely. Of course, you need to ensure you have the bolts themselves supporting the bracket secured into the wall perfectly, with no play at all, otherwise catastrophe will be certain. Our wall mount is easy to install and includes a full step by step installation guide and a spirit level.Compatible with Samsung, Sharp, Sony, Panasonic, Toshiba, LG, Philips and all brands as long as they are VESA compatible. The Invision ultra strong TV wall bracket mount comes with double arms each connecting to stress loaded compression bearings.

This high specification wall mount design comes with integrated cable concealment panels that offer safe and practical functionality whilst preserving the clean look of your living space OPTIMISED VIEWING EXPERIENCE - Change your viewing position with ease. After ensuring the holes lined up perfectly, central within the wall bracket mounting holes and to the bracket and line I had drawn, I removed the bracket from the wall. Thankfully the wall it is on in a 70 year old house had good solid blocks and reasonable plaster behind the wall paper.If you can’t find the details in the manual or online, you can measure this yourself: it’s the distance (in millimetres) between the two horizontal holes and the distance between the two vertical holes. Includes a selection of M4, M5, M6 and M8 TV mounting screws with 6 wall fixtures for wood and masonry. The TV bracket goes onto the TV (see enclosed instructions supplied with TV stand) before the wall bracket is attached to the wall.

a screwdriver or Socket and Allen key ‘F’ and also put to one side (both wall plate covers and securing bolts will be used later on step 4).I did this by lining up the vertical arms on the back of my TV, and then bolting the vertical arms in the correct place on the two horizontal arms of the front half of the bracket. I particularly liked the way the wall fixing bolts were covered and the cable management system which was able to cope with the mains lead, an aerial cable and 3 HDMI cables with ease making for a very clean a tidy appearance when the TV is extended and swivelled. The HDTV-DXL comes with the full Invision Compatibility Promise ensuring that you can use your TV bracket for Samsung, Sharp, Sony Panasonic, Toshiba, LG, Philips, JVC, Hinsense and TCL TVs.