When the tail wags by itself, troubleshoot by connecting up one eye at a time to determine if one eye has more drag then the other. This can be determined by observing the width of the tail swing. Remove and clean the eye having more drag. ANIMATION FAQ’s – What do I do when: FAQ-1.Hanging on my wall, Kit-Cat maintains accurate time, but the eyes and tail refuse to animate? g. Install the J-shaped white plastic clips pushing them fully into the notch, and aligning straight forward. This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Yes! Kit-Cat is true to the original 1932 design and still made by the original company in the USA.

If it stops when up on the wall, it may mean the wall is not straight. You may need to move it to a straighter wall. The 40s and 50s were decades of explosive growth for Kit-Cat’s popularity and marked the first (and last) changes in his design. The top paws and the Kit-Cat’s dapper bow tie were added. Due to his popularity, it wasn’t long before Kit-Cat became synonymous with the 1950s in America. 1962If the tail and eyes are still not swinging correctly, release the eye stems from the lever slots. The tail should swing by itself. If the tail swings without the eyes being engaged, the eyes need the adjustment. Occasionally you may need to clean the eye pegs and clips with a lint-free cloth to remove any build-up of dust. (The principle: the eyes have to pivot on a smooth surface for least resistance, thus they need to be as lightweight as possible.) d. With the eye out, blow in the case holes which held the eye to remove any dust, dirt, etc.. Examine the top and bottom eyeball pins making sure there is no plastic burr – if so remove with a nail file.