The EC5 is IC5 compatible, so you can connect the Arrma car directly without adapters or changing plugs. JST connectors are an excellent choice for applications where weight and space are at a premium. They are relatively inexpensive and widely available. You can use a soldering tool to replace the EC5 with other different plugs. But it is very difficult on the IC5 plug. It has wires and data lines on it, you can’t separate them. In this blog post, we will discuss the different types of RC battery connectors and review their unique specifications. We'll also provide tips on choosing the right RC battery connector for your RC vehicle.

Connector: Which is better? - Ampow Blog EC5 vs XT60 Connector: Which is better? - Ampow Blog

Got a high-power drone? Then this connector is for you. With a load capacity of 150 Amps, the XT150 is the Godzilla of the XT family. It comes with an attached wire and uses 6mm pins to connect with the lipo battery. Cool isnt it! I like the XT60 because it is easy to solder the leads on. Once the soldering is done, the plastic cover helps protect the lead ends. The plastic cover is the grey part on the connector. It spans on and off pretty easily with a pair of pliers.

FLIGHT SIMS

The Molex or JST PH 2 Pin connector is a small plastic coated connector with wires. They have a female and a male plug. You will find them in different RC vehicles as well as CD drives, hard disks, motherboards, and power supplies. Made of a Nylon body, these are resistant to melting and have a high-temperature tolerance. The XT60 can handle up to 60A current draw, making it one of the most popular RC car battery connectors.

Kraton - IC5 vs EC5 | ARRMA RC Forum Kraton - IC5 vs EC5 | ARRMA RC Forum

If the ESC’s output current is greater than the connector’s current rating, consider using a larger connector. (Tips: The XT60 is rated at 60A, and the EC5 is rated at 150A.) EC5 and XT60 can be used up to 1000 times and are very durable. Generally speaking, as long as it is not abused, there should be no problem (Tips: the number of cycles of lithium batteries is 200~300 times). Do I need to replace XT60 with EC5?

PAINT

The second plug is the balancing connector. This one is connected to each of the cells and to a balance charger. The balance charger charges each cell individually - and ensures that their voltages are equal. Low resistance, ease of applicability, protection from reverse polarity, and high amp draws are some of the advantages of using a Traxxas connector. The IC3 connector is a 3-pin plug commonly used in the radio-controlled (RC) hobby for connecting the battery and motor leads to the electronic speed control (ESC). It is a compact and lightweight connector that is widely used due to its affordability and ease of use. The TRX connectors are mainly used in Traxxas vehicles and devices. But you can buy them separately if you want them.

iC5 Smart Connectors Learn more about the Spektrum iC3 and iC5 Smart Connectors

TRX ID connectors come in reverse polarity protected housing. So you will never be able to connect your wires the wrong way and damage any of the onboard electronics. One of the robust Lipo battery connectors of the 5-10 Amp range would be the JST RCY connector. They come with installed wires and can be plugged and unplugged easily.

TYRES

You can use the EC2 for 20 Amp connections. It also holds well on 30 Amps. Medium Lipo Battery Connectors (30 Amps to 70 Amps) Deans Connector or T Plug