If the pilot loses aircraft signal, the gimbal operator is now able to take control of the aircraft to safely return to home or land directly. Flight Safety And Stability Its ability to capture beautiful 8K footage, combined with upgraded intelligent shooting modes, enhanced safety features and flight stability through RTK positioning, RC Plus compatibility, and revised dual-control experience makes it a seriously attractive proposition for pro-level content creators. The controller has a battery life of just over three hours when using the built-in battery, but this can be extended to six hours with an external WB37 battery. The controller also support battery hot-swapping. Longest video transmission distance in single control mode: FPV Camera: approx. 15 km (FCC), 8 km (CE/SRRC/MIC). Gimbal Camera (1080p/60fps live feeds): approx. 13 km (FCC), 7 km (CE/SRRC/MIC). Gimbal Camera (4K/30fps live feeds): approx. 5 km (FCC), 3 km (CE/SRRC/MIC).

The battery charging station is is one that can charge up to 8 batteries at a time and has total storage space for up to 12 batteries. This is a must have piece of kit for the professionals on the move. Longest video transmission distance in dual-control mode: FPV Camera: approx. 12 km (FCC), 6.4 km (CE/SRRC/MIC). Gimbal Camera (1080p/60fps live feeds): approx. 11.2 km (FCC), 5.6 km (CE/SRRC/MIC). Gimbal Camera (4K/30fps live feeds): approx. 4 km (FCC), 2.4 km (CE/SRRC/MIC). And when it comes to the maximum live feed frame rate, the Inspire 3 can achieve 1080p/60fps, while the Inspire 2 tops out at 720p/30fps. Dual Control This upgraded system provides a major leap in transmission distance, latency and overall stability compared to the Lightbridge video transmission system of the Inspire 2. Both cameras use the Inspire 2 image processing system called CineCore 2.1. CineCore 2.1 Image Processing System

Popular workflow support: Make editing more efficient. By using the optimised FAT32/exFAT file syte, view footage directly on a computer once CINESSD is connected. In contrast, the Inspire 2 features forward and downward vision system and an upward-facing infrared sensors.

In fact, the X7 uses the Super 35 mm area of the APS-C sensor (23.5×12.5 mm) in video mode and the full sensor size (23.5×15.7 mm) in stills mode. The FPV camera has 2 axis which means you essentially get two different flight views from the Inspire. The first being the flight view and the second being the main camera view – this is a lot simpler to use than it sounds and provides so much control. Essentially, every part around the optic is reduced to the minimum (no ring, switch or window) and the lens casing is made out of carbon fiber. The X5S and the X7 for their raw capabilities, lenses and prime lens sets that you can use with them This DJI Inspire 2 review looks at the specs, features and your frequently asked questions on this top aerial cinematography quadcopter.The Inspire 3 has a maximum flight time of 28 minutes, while the Inspire 2 can achieve 23 minutes with the X7, or 27 minutes with the less powerful X4S camera. In terms of photography, the adoption of the APS-C standard means the pictures will be wider because of the 3:2 ratio instead of the squarish 4:3 images produced by a Micro Four-Thirds camera. The lowest latency of the gimbal camera was measured when recording 4K/60fps ProRes RAW video. The lowest latency of the FPV camera was measured with strong video transmission signals. In contrast, the DJI Inspire 2 weighs 3,440g (including props and batteries, but without gimbal and camera), while its max take-off weight is 4,250g.