RJ-45 自动感应 10/100/1000 端口（IEEE 802.3 类型 10BASE-T，IEEE 802.3u 类型 100BASE-TX，IEEE 802.3ab 类型 1000BASE-T）；双工：10BASE-T/100BASE-TX：半双工或全双工；1000BASE-T：仅全双工 RJ-45 10/100/1000ポート(IEEE 802.3 Type 10Base-T、IEEE 802.3u Type 100Base-Tx、IEEE 802.3ab 1000Base-T Gigabit Ethernet)またはSFPスロット(SFPトランシーバーに使用)として使用可能 ArubaOS-Switch Software Feature Support Matrix for XX.YY (where XX.YY is the software branch you're interested in) document would shed some light about which features are implemented on which XX.YY Software Branch. The 2930F Switch Series models with 1G/10G SFP⁠+ ports added support for this J9054C/J9054D 100FX transceiver. The J9054C/J9054D are supported in models with 1G SFP ports.

RJ-45 10/100/1000 端口（IEEE 802.3 类型 10Base-T；IEEE 802.3u 类型 100Base-Tx；IEEE 802.3ab 1000Base-T千兆位以太网）或者 SFP 插槽（用于 SFP 收发器）端口 For J8692A, J8693A: K.12.01 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483, and J9054D 1990-4483 and 1990-4360) The YA.16.08 (generically the 16.08) is the cutting edge and it includes all the new features, the most conservative is now the the 16.02...personally I use the 16.05 and the 16.08...but it boils down to what feature you need (16.08 has more feature than 16.07, 16.07 has more than 16.06 and so on...).IEEE 802.3 类型 10BASE-T，IEEE 802.3u 类型 100BASE-TX，IEEE 802.3ab 类型 1000BASE-T）；双工：10BASE-T/100BASE-TX：半双工或全双工；1000BASE-T：仅全双工

dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) Now few words regarding the "recommended software version"...actually, as you can see, for your Aruba 2530 (that is fairly generic for the entire Aruba ArubaOS-Switch NOS) there are 5 (five!) current software branches all receiving updates: J9772A, J9773A, J9774A, J9775A, J9776A, J9777A, J9778A, J9779A, J9780A, J9781A, J9782A, J9783A, J9853A, J9854A, J9855A, J9856A Traffic prioritization with IEEE 802.1p allows real-time traffic classification with support for eight priority levels mapped to either two or four queues using weighted deficit round robin (WDRR) or strict priority (SP).

JL253A, JL254A, JL255A, JL256A, JL258A, JL263A, JL264A, JL259A, JL260A, JL261A, JL262A, JL557A, JL558A, JL559A

Yes, if you have the HP/HPE/Aruba SKU (in your case it is J9775A representing the Aruba 2530 48G Switch model) you can go to the HPE My Networking portal (see here) found here: The 25G module (JL687A) requires configuration of "interface groups" (groups of 4 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). insert the SKU and select what the lookup will provide you, in your case "Aruba 2530 48G Switch (J9775A)".RJ-45 10/100/1000ポート(IEEE 802.3 Type 10Base-T、IEEE 802.3u Type 100Base-Tx、IEEE 802.3ab 1000Base-T Gigabit Ethernet)またはSFPスロット(SFPトランシーバーに使用)ポートとして使用可能 The 8325 requires configuration of "interface groups" (groups of 12 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (default is to use 25G transceivers / DACs). For use in the SFP ports of the J9263A 6600-24G Switch, the J9264A 6600-24G-4XG Switch, and the J9451A 6600-48G Switch

For J9310A, J9311A: K.14.50 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483, and J9054D) RJ-45 自动感应 10/100 PoE+ 端口（IEEE 802.3 类型 10BASE-T，IEEE 802.3u 类型100BASE-TX，IEEE 802.3at PoE+）：介质类型：Auto-MDIX；双工：半双工或全双工The 8325 requires configuration of "interface groups" (groups of 12 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). See the