Youmile USB Programmer Series Burner Chip 24 EEPROM BIOS Writer 25 SPI Flash + Sop8 Test Clip

£9.9
FREE Shipping

Youmile USB Programmer Series Burner Chip 24 EEPROM BIOS Writer 25 SPI Flash + Sop8 Test Clip

Youmile USB Programmer Series Burner Chip 24 EEPROM BIOS Writer 25 SPI Flash + Sop8 Test Clip

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

Manufacturer usually doesn’t provide UEFI flashable binary by third party hardware programmer. You need to use the manufacturer software to update. Setelah icon dari Software muncul di desktop atau layar depan untuk cara menggunakannya Silakan simak Langkah-langkah berikuti ini; The problem may have been @BIOS in general, or wrong BIOS flashed in, or it’s also possible sometimes retail BIOS does not work on some early ES boards so you have to stay on the ES BIOS and update it yourself with whatever changes you want. So both ASProgrammer 1.41 and Flashrom are the only ones that seems to be working from start to finish, but for some reason that I can’t understand, the Motherboard refuses to react to the BIOS Chip as you saw in the video above. Please do not buy the ch341a! It is incorrectly engineered for the purpose of ROM flashing on systems with 3.3v SPI (which is most coreboot systems). DO NOT USE IT! This issue still isn’t fixed by the manufacturer, and it doesn’t look like they will ever fix it.

if nothing works, then the procedure becomes more complex. If the software can not read the chip properly, it can not also reprogram it, on the contrary it will further corrupt it. It will be necessary to disassemble the BIOS of the motherboard and put it directly on the small integrated circuit (as in the image below). This works fine but you of course loose board specifics until you correct this, but that doesn’t matter right now. And, in this situation the retail one may not work on this board at all programmed in or flashed in with Qflash/EFIFlash ect. Then you need to install it in the Programmer, making sure the notch faces the same way as indicated in the white diagram in the bottom right corner: Ch341a is a Mini USB Programmer, which helps to flash the firmware in the flash IC. There are lots of different types and different series of flash IC available in the market. but this low cast Ch341a USB mini programmer is designed to support 24 Eeprom and 25 SPI flash 8 pins and 16 pins SPI flash. It has installed the ch341a chip, which can recognize the EEPROM 24 and SPI flash with an indicator Green light to show that modules are working. The ch341a programmer is very User friendly and it is also Supported the USB to TTL Conversation. Ch341a Programmer Software For Android. CH341SER_LINUX.ZIP– Linux driver source code for serial port (don’t need this one, it’s already included in kernels)I have no clue if by switching something on the board will copy\delete or damage the content of B_BIOS

CH341PAR.ZIP - archive containing driver files for interface mode and API (header and library to access the device and use any protocol you want). La soluzione e' quella di sollevare il pin di alimentazione del CH341A (pin 28) e saldare un filo da questo pin al condensatore C4 (sul lato collegato al pin 9 del CH341A) e poi da qui, all'output del regolatore da 3.3v (pin 2). Quindi il cavo fara' questo percorso: Pin28 CH341 -> Pin9 CH341A (C4) -> Pin2 LM1117 (Regolatore 3.3v). Volendo, invece di sollevare il pin del chip, e' possibile tagliare la pista di alimentazione sulla PCB e saldare un filo dal pin 28 all'output del regolatore da 3.3v. If you go for a SOIC8, mounted it to the SOP to DIP adapter (208mil 1.27mm one) and solder 2.54mm headers to it. You could put the 2.54mm pins in a breadboard, then solder the chip to the adapter PCB and mount that to the pins on the breadboard, to keep it aligned, and solder that. Whith the PCB on the pins, and the pins in the breadboard, push the pins inwards a little bit.There are also some other programmers and boards based on this chip. You can find most of them by searching "CH341A" on Banggood and AliExpress. Here is an overview of the programmers and development boards available: Since the Windows tool has severe issues with some chips and doesn't have an auto-verification system, your best bet is to do the flash from a Linux computer. If you don't have one, you can use the instructions in the following paragraphs to set up a Live USB with Linux (a Live USB is one which contains an OS you can boot from and use as a normal computer). If you do have a Linux system already, you can skip to the next part of the guide.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop