In the following paragraphs below you will see a product called Paint and Varnish Remover and this is the best product DIY Doctor has found in over 30 years of decorating, for stripping paint. It is safe and it is clean. If this project looks like product placement it’s because it is! This is the only way we strip paint and we know what we are doing. Super Strength Degreaser removes grease, oil, grime, glue and even light carbon build-up. It is effective and pleasant to use, water-based, no abrasives with no H (hazard) or P (precautionary) statements on the labhttps://www.ecosolutions.co.uk/homestrip-xtex/el. In some cases (depending on what you are applying to) gels and pastes can also cause surface damage e.g. to some wood fillers. If this is the case then you will have to repair/replace before you can then start painting.

It is easier to remove it with a long-handled blade scraper, as it helps lift it from the surface, rather than spreading it around the wall. Despite the above advantages there are also quite a few disadvantages; it’s easy to use the wrong grade of paper for the wrong surfaces causing damage. If unlike me, you have plenty of money, you might consider getting a professional in. see less Customer Answer: You only need to leave Home Strip on the surface for a short while, anything from 20 – 40 minutes and up to 24 hours (dependent on how many layers of varnish there are on the surface). After 20 minutes plus you can test a small area to see if the varnish is ready to come off. Use a scraper and slide it under the paint or varnish and if it doesn’t lift easily then you will know you need to leave it on a bit longer. How many times will I need to use Eco Solutions Home Strip® Paint & Varnish Stripper to remove Varnish?Most DCM-free paint strippers have just replaced one hazardous solvent with another, but Eco Solutions patented technology removes the hazardous solvent content and replaces it with water. We get many questions regarding stripping paint from flaky walls, door and window frames etc. As is the case with many jobs the final finished product will be reflected by the prep work carried out on the surface. Eco Solutions‘ products are all safe-to-use, water-based, non-toxic products and there is one for most jobs whether you are upcycling, cleaning or stripping in your home or commercially. Although paint stripper is readily available and arguably the easiest product to use when trying to strip paint from wood, it’s not the only option. If you’re looking for a cleaner, more natural option, these could work for you instead: The first is using sandpaper – Firstly start with quite a coarse grade of paper (60 or 80 grit) and as you get through the layer(s) of paint move down to more of a medium paper (180 or 240 grit).

One tub should do about 12 square metres. Don’t spread too thin or you’ll have to re-coat. Don’t try and do 12 sqm in one go, do a few metres at a time. Get yourself a wide scraper too. Customer Question: Once all the loose paint had been removed it was time for a wash down and also went over the rest of the door with the scouring ball and soapy water to clean the whole surface. Home Strip is totally ph neutral so there is no need to neutralise like you would with a solvent, alkaline or acid based paint remover. Drum sanders – these feature a foam drum that features an abrasive coating that revolves and creates the friction between the drum and the surface. If you mean just plasterboard without plaster on it then yes it has been used many times in this instance. Care does have to be taken though when you get down to that surface not to be over-aggressive as you can damage the paper surface. Customer Question:

Paint Stripping Using Heat

Developed using ‘science not solvents’ by Eco Solutions – the world’s most advanced, innovative water-based technology After a short amount of time, you should see the paint start to come loose. It’ll start to bubble and come away from the wood, and then all you have to do is scrape it away with a paint scraper. Which ever of the above methods you have used, once you have removed all of the paint it is always a good idea to clean over the surface with some fine wire wool or very fine sandpaper. No Fumes – Product requires no ventilation – Suitable for use by people with respiratory problems such as asthma sufferers

Coverage is 4-6 sq mtrs per litre. Home Strip Paint and Varnish Remover is a working wet system that keeps the paint wet at all times and significantly reducing any risk of dust. It’s best practice to do this with a paint scraper, but you may find that it’s possible to lift away any small little nooks and crannies with wire wool or with a cloth you have lying around. Most DCM–free paint strippers have just replaced one hazardous solvent with another, but Eco Solutions patented technology removes the hazardous solvent content and replaces it with water. A safer alternative for you and your family. Product Features and Advantages One single application can remove up to five layers using this method. Removal can be made easier using a bowl of soapy water and a stainless steel scouring ball, especially on intricate pieces. Use of soapy water and a stainless steel scouring ball also can remove stains from the grain effectivley. On dead flat areas a scraper is advisable to remove lose material first.Once this time is reached test a small area first to ensure that it has worked correctly. The paint should lift away with the paste. Using this method, it is possible to remove textured coatings such as Artex without causing dust that contains asbestos fibres. The finished article speaks for itself and at a fraction of the cost in purchasing a new door. Home Strip was easy to apply, no fumes or skin burns to contend with which makes paint removal a far easier task. A very safe paint remover. Have to be aware of the type of surface you are sanding e.g. you can damage timber if you do not run with the grain when sanding Alternatively, you could grab a clean cloth and soak it in warm, soapy water. Then, wipe it over the wood to remove any remaining paint stripper.